CGMIX Home Page

EQList Home Page

EQList Search

EQList Definitions

USCG Official Site

USCG FOIA Information

Marine Safety Center

Office of Design and Engineering

List of All Approval Series

List of Additional Accepted Components

Equipment Details:
Coast Guard Approval Number:	162.029/257/0
Issued:	Friday, May 19, 2023
Expires:	Saturday, October 23, 2027
Approval Status:	APPROVED
FIXED FIRE EXTINGUISHING SYSTEM Fireaway Inc 5852 Baker Road Minnetonka, MN 55345 UNITED STATES
Stat-X Models: 30T, 60MT, 100T, 250T, 250MT, 500T, 1000MT aerosol generators; with associated brass mechanical and thermal actuators (158F - 254F), and control unit as a pre-engineered fire extinguishing system. Fire suppression system is designed to protect against Class A, B and C fires, in both normally unoccupied and normally occupied spaces. Maximum protected gross volume for an unoccupied space is 321 cu. ft (9.1 cu. m) and a maximum height of 8ft (2.5m) for a single thermal unit; or a maximum volume of 2568cu. ft (73 cu. m) with a maximum height of 16 ft (4.9m) for a series of mechanical units in either normally occupied or unoccupied spaces; see approved manual for details. M model generators are mechanical-manual, T model are thermal-automatic. Systems intended for use in normally occupied spaces must have a pre-discharge alarm. Installations are subject to OCMI review. Systems may be installed with additional manufacturer supplied accessories including Advantage Control Panel. Stat-X system is deemed equivalent to a gas-based fire suppression system within its dimensional limitations. Identifying Data: Underwriters Laboratory (UL) Certification of Compliance EX15004 dated September 02 2021. Fireaway manual PN 19402 ver 1.0 and USCG Letter dated October 23, 2022 Follow-up Program: UL Supersedes certificate dated October 23, 2022 updating pre-discharge alarm criteria.
EC/US MRA Approved: FALSE
***END***
DISCLAIMER
The approval information shown here represents the latest issuance of the certificate as of the issued date above. The equipment may have been manufactured and sold under a previous version of the approval based on an earlier date of manufacture prior to the date of issue shown here.