|
|
|
Equipment Details:
|
|
|
|
Coast Guard Approval Number:
|
164.108/40/0
|
|
Issued:
|
Friday, December 3, 2004
|
|
Expires:
|
Thursday, December 3, 2009
|
|
Approval Status:
|
FORMER-MAY USE
|
|
|
BULKHEAD PANELS (IMO)
SHINSUNG TOTAL ACCOMMODATION SYSTEM
#1589-3 Songjeong-dong
Gangseo-gu
Busan,
KOREA, REPUBLIC OF
|
|
"STACO-W-B50D" steel-faced mineral wool bulkhead panels with corrugated plates and inspection door meets Class B-15 criteria in accordance with Parts 1 and 3 of Annex 1 of the IMO FTP Code.
"STACO-W-B50D" is steel faced on each side with 0.6 mm steel sheets. Minimum thickness of panel is 50 mm. The nominal densities are 200 kg/m^3 and 280 kg/m^3. The corrugated plates may be used for cable conduits. Minimum thickness of inspection door (STACO-AD-25A) is 25 mm. The nominal density of the inspection door (STACO-AD-25A) is 140 kg/m^3. Inspection door (STACO-AD-25A) maximum dimensions are 632 mm x 1884 mm.
Identifying Data: Fire Insurers Laboratories of Korea (FILK) Test Report No. D203-018B-4 dated November 7, 2003; Test Report No. D103-018FS dated October 24, 2003. STACO Drawing No. G-W-B50D (USCG) (Bibliography) dated September 9, 2003. Arrangement Drawing of STACO-W-B50D: Drawing No. USCG-W-B50D dated March 5, 2004, Revision 1. Inspection Door (STACO-AD-25A): FILK Test Report No. D204-001B-1 dated March 10, 2004; Test Report No. D104-001FS dated March 10, 2004; STACO Drawing No. G-AD-25A-1 (USCG) (Bibliography) dated 2004.11.09.
Approval terminated 18 April 2007 upon notification from FILK that follow-up service has been terminated at manufacturer's request.
This type approval is contingent on continuous compliance of the product verified via follow up service by FILK as referenced in Document No. D203-018 dated September 19, 2003. Product shall be installed in accordance with manufacturer's instructions and drawings.
Only valid to be manufactured at the above location.
This certificate supersedes approval number 164.108/40/0 dated 04 March 2004 to include a Class B-15 Inspection door (STACO-AD-25A) and update the identifying data.
|
|
|
EC/US MRA Approved: FALSE
|
***END***
|
|
|
|
|
|
|
|
DISCLAIMER
|
|
The approval information shown here represents the latest issuance of the certificate as of the issued date above. The equipment may have been manufactured and sold under a previous version of the approval based on an earlier date of manufacture prior to the date of issue shown here.
|
|
|
|
|
|